TM 5-5420-234-14&P
5-12. HOOK ARM REPAIR (continued).
d. Assembly.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(1) Apply adhesive-sealant to outside surface of two bushings (11).
NOTE
Apply light coat of grease to threads of removal/installation tool before using.
Make sure hole in bushings are aligned with hole for grease fitting in hook arm
before installing.
(2) Using removal/installation tool, install two bushings (11) in hook arm (1).
NOTE
Apply light coat of grease to outer edges of seals before installing.
9
(3) Install four seals (10) in hook arm (1).
(4) Install two grease fittings (9) in hook arm (1).
10
10
1
11
REMOVAL
1
TOOL
REMOVAL
TOOL
1
11
INSTALLATION
TOOL
INSTALLATION
TOOL
1
5-90
