TM 5-5420-234-14&P
4-37. BAP WINCH HYDRAULIC SYSTEM REPLACEMENT (continued).
NOTE
Make sure breather valve is facing rear of the BAP when installing valve
block.
(5) Install two bolts (40), washers (41), new lockwashers (42), and nuts (43) and valve block (28) on winch
frame (18).
(6) Install straight adapter (38) and new O-ring (39) on side of valve block (28).
NOTE
To install check valve correctly, use the marks made on check valve, straight
adapter, and tube nut during removal.
(7) Install tube nut (49) on straight adapter (48). Install check valve (47) on straight adapter (48). Install
straight adapter (46) on check valve (47). Install tube nut (44) and tube (45) on straight adapter (46).
(8) Install tube nut (54) and tube (55) on elbow (56). Install tube nut (37) on other end of tube (55) on
straight adapter (38).
(9) Install tube nut (59) and tube (60) on elbow (61).
37
38
39
28
42
43
41
40
18
45
48
49
47
46
44
54
55
56
61
60
59
4-474
