TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
19. BAP WINCH DOES NOT WIND IN (MODEL B ONLY) (continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut off
from circuit before continuity can
be checked. Failure to comply with
this caution may result in damage
to test equipment or electrical sys-
tem.
NOTE
A reading of infinity indicates an
open circuit.
WINCH IN VALVE
ANDSOLENOID
(1) Set multimeter to ohms position.
(2) Connect multimeter between position
"1" and position " 2" on winch in valve
solenoid. Check multimeter for
continuity.
POSITION 1
POSITION 2
Change 1
4-4-14.3
4 429
