TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
18. BAP WINCH DOES NOT WIND OUT (MODEL B ONLY) (continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut off
from circuit before continuity can
be checked. Failure to comply with
this caution may result in damage
to test equipment or electrical sys-
tem.
NOTE
A reading of infinity indicates an
open circuit.
(1) Set multimeter to ohms position.
(2) Connect multimeter between position
"1" and position " 2" on winch out
valve solenoid. Check multimeter for
continuity.
POSITION 1
POSITION 2
WINCH OUT VALVE
ANDSOLENOID
4-49411
4- -02.9
4 5.4
Change 1
