TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
18. BAP WINCH DOES NOT WIND OUT (MODEL B ONLY) (continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut off
from circuit before continuity can
be checked. Failure to comply with
this caution may result in damage
to test equipment or electrical sys-
tem.
WINCH OUT
(1) Set multimeter to ohms position.
CONNECTOR
NOTE
POSITION 1
POSITION 2
A reading of infinity indicates an
open circuit.
(2) Connect multimeter between (J3),
position "5", and winch out solenoid
connector, position "1". Check
J3
multimeter for continuity.
POSITION
(3) Connect multimeter between (J3),
35
position "35", and winch out solenoid
connector, position "2". Check
multimeter for continuity.
POSITION 5
4-4-02.9
4 407
Change 1
