TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
18. BAP WINCH DOES NOT WIND OUT (continued).
CONTINUITY TEST
(1) Disconnect remote control
cable from remote control
REMOTE CONTROL
unit.
CONNECTOR (J9)
(2) Set multimeter to ohms
position.
(3) Position EMERGENCY STOP
switch in the ON position.
(4) Have assistant hold the
WINCH switch in the OUT
position.
NOTE
A reading of infinity indicates
an open circuit.
REMOTE CONTROL
(5) Connect multimeter leads to
UNIT
positions "E" and "L" on
remote control unit and check
multimeter for continuity.
(6) Repeat Step 5, but this time
check for continuity between
positions "L" and "C".
Change 1
4-395
