TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
3.
ENGINE HIGH IDLE DOES NOT OPERATE (continued).
CONTINUITY TEST
REMOTE CONTROL
(1) Disconnect remote control cable from
CONNECTOR (J9)
remote control unit.
(2) Set multimeter to ohms position.
(3) Position remote control EMERGENCY
STOP switch in the ON position.
(4) Position HIGH IDLE switch in the ON
position.
NOTE
A reading of infinity indicates an
open circuit.
(5) Connect multimeter leads to positions
REMOTE CONTROL
"G" and "L" on remote control unit,
UNIT
and check multimeter for continuity.
4-65
Change 1
