TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
2. BAP FRONT PIN LOCK WILL NOT OPERATE (continued).
HANDRAIL
LANYARD
VERIFY REPAIR
(1) Make sure safety pin is
engaged through lever.
(2) Run lanyard from toolbox
LEVER
forward and attach to
Transporter handrail.
(3) Attach lanyard to front
bridge lock lever.
(4) Remove safety pin from
lever.
(5) Pull lanyard to release
LEVER
front pin locks.
(a) If front pin locks do
not release, fault was
not corrected. Notify
Direct Support
SAFETY
maintenance.
STOWAGE
PIN
(b) If front pin locks do
CONNECTOR
release, fault has been
corrected.
(6) Remove and stow lanyard.
(7) Insert safety pin in lever.
(8) Disconnect BAP air
supply hose from HEMTT
BAP AIR
FRONT
air supply coupling and
SUPPLY HOSE
PIN LOCK
connect to stowage
ASSEMBLY
connector on BAP.
(9) Close both front pin lock
assemblies.
