TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
2. BAP FRONT PIN LOCK WILL NOT OPERATE (continued).
AUDIBLE INSPECTION
WARNING
Air system is under
pressure. Never point
air flow toward personnel
or injury could result.
(1) Loosen hose clamp and
remove BAP air supply hose
from fitting. Check for air
pressure at end of air supply
hose.
(a) Very little or no air
BAP AIR
pressure indicates
SUPPLY HOSE
HEMTT air supply is at
fault; refer to TM 9-
2320-279-20.
(b) Steady and strong air
FITTING
pressure indicates
HEMTT air supply is
CLAMP
good.
(2) Install BAP air supply hose
CBT AIR
on fitting and tighten hose
SOURCE
clamp.
4-33
