TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
1. BAP CENTER ROLLER AND/OR TRANSLOAD ROLLERS WILL NOT OPERATE
(continued).
HAND
PUMP
VISUAL INSPECTION
FITTINGS
(1) Place suitable container
HYDRAULIC
under transload roller
HOSES
cylinders.
(2) Remove two hydraulic
hoses from fittings on
transload roller cylinders.
HANDLE
(3) Move hand pump selector
TRANSLOAD
lever to down position.
ROLLER
(4) Pump hand pump handle
CYLINDER
SELECTOR
and observe open ends of
LEVER
MANIFOLD
two hydraulic hoses.
(a) If hydraulic fluid is not
flowing, replace
transload roller
manifold (para 4-41).
(b) If hydraulic fluid is
ROAD SIDE SHOWN
flowing, replace
transload roller
cylinders (para 4-41).
(5) Install two hydraulic hoses
on fittings on transload
roller cylinders.
(6) Bleed system to remove
trapped air (para 4-43).
4-29
