TM 5-5420-234-14&P
Section II. SERVICE UPON RECEIPT
This section provides or refers to the procedures required for Unit maintenance to ensure that the CBT System is
adequately inspected and serviced and is operationally tested before being subjected to normal usage. When a new,
used, or reconditioned CBT or BAP is received, determine whether it has been properly prepared for service and is
capable of performing its mission by following the instructions in this section.
Upon receipt of a new CBT or BAP, the receiving unit must see if it has been properly prepared for service and is in
good condition. Inspect all assemblies, subassemblies, and accessories to be sure they are in proper working order
(Chapter 1). Secure, clean, and correctly adjust and/or lubricate as needed (Chapters 3 and 4 and Appendix G).
Check all tools and equipment to make sure every item is accounted for and is in good condition, clean, and properly
mounted or stowed.
CABLE DIAGRAMS.
Electric and hydraulic system schematics for the CBT can be found as foldout pages in Appendix J of this manual.
