TM 5-5420-234-14&P
2-20. NORMAL TRANSFER OF THE BAP TO TRAILER (continued).
CAUTION
If transload rollers roll over lifting eyes, damage to the BAP could occur.
l.
Move joystick (21) to UNLOAD until both transload rollers (10) contact trailer (22). Make sure transload
rollers (10) clear the top of trailer lifting eyes (23).
24
21
10
22
23
m . Release joystick (21).
n. Make sure trailer guides (24) are between transload rollers (10).
NOTE
If trailer guides are not between transload rollers, perform Step o. If trailer guides
are aligned, go to Step p.
25
o. If trailer guides (24) are not between transload rollers (10):
(1)
Move joystick (21) to LOAD.
(2)
When the BAP is fully reloaded, release joystick (21).
Reposition Transporter to line up with trailer.
(3)
Repeat Steps i through n.
OFF
ON
HIGH IDLE
p. Turn HIGH IDLE switch (25) to ON.
q. Move joystick (21) to UNLOAD until BAP front end contacts trailer (22).
r.
Release joystick (21).
s.
Turn HIGH IDLE switch (25) to OFF.
2-114
