TM 5-5420-234-14&P
2-20. NORMAL TRANSFER OF THE BAP TO TRAILER (continued).
CAUTION
When selecting PTO ENGAGE switch, engine must be at low idle speed. Se-
lection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in damage to
equipment.
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
k. Turn LHS MODE SELECT switch (19) to AUTO, and position PTO ENGAGE switch (20) to ON.
PTO ENGAGE
19
20
OFF
ON
WARNING
Trailer wheels must be chocked during transfer operations or serious injury or
death to personnel could result.
NOTE
The amount of time it takes to load and unload is controlled by engine speed. To
reduce loading and unloading times, engine speed can be increased to approximately
1200 rpm by engaging HIGH IDLE switch.
2-113
