TM 5-5420-234-14&P
Table 2-1. Operator/Crew Preventive Maintenance Checks and Services (PMCS) (continued)
Item To
Item
Check/
Not Fully Mission
No.
Interval
Service
Procedure
Capable If:
22
During
Remote Control
c. Check to make sure remote controls
Unit (continued)
do not operate when remote control
EMERGENCY STOP switch (5) is in
OFF position.
d. Turn remote control EMERGENCY
STOP switch (5) to ON position. Lamp
(6) should light.
e. Position HIGH IDLE switch (7) to
ON. Engine rpm should increase audibly.
Turn HIGH IDLE switch (7) to OFF.
5
6
7
8
f. Position remote control HOOK ARM
switch (8) to unload until hook arm
cylinders (9) are extended approximately
6 inches (15 cm).
9
.
IN )
6 CM
5
(1
2-26
