TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
17-28.4. RIGHT HAND FRONT CONTROL VALVE BODY REMOVAL/REPAIR/INSTALLATION
(M984E1) (CONT).
(3) Connect nine hydraulic hoses (7) and three
hydraulic lines (8).
NOTE
Do not remove screw from right rear plug.
(4) Remove seven screws (9) from each solenoid (10).
(5) Turn seven solenoids (10) up.
(6) Install eight seals (11), plugs (12), and screws (13).
(7) Turn seven solenoids (10) down and install seven
screws (9).
(8) Tighten 32 screws (9) on eight solenoids (10).
(9) Install four screws (14) with
eight washers (15) in
cover (16).
(10) Install four clips (17) on
bracket (2).
(11) Install cover (16) on
bracket (2) with four
screws (14).
f. Follow-on Maintenance.
(1) Install control handles
(TM 9-2320-279-20).
(2) Check crane operation
(TM 9-2320-279-10).
(3) Check for leaks.
END OF TASK
17-138.24