TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
NOTE
Shims are available in different thickness 0.010 in. (0.25 mm), 0.020 in. (0.5 mm),
and 0.060 in. (1 .55 mm) mix to obtain shimming thickness required.
(33) Install shim (44) and plate (45) with three Iockwashers (46) and screws (47) to winch (32).
(34) Attach dial indicator on winch (32).
NOTE
End play should read between 0.001 and 0.010 in.
(35) Move drum (12) fully toward ring gear (39) end of winch (32) and read amount of end play on
dial indicator.
(36) Install gasket (48) and adapter (49) with four screws (50) to motor end support (3).
d. Follow-on Maintenance.
(1) Install heavy-duty winch brake (para 16-17).
(2) Install heavy-duty winch motor (para 16-13.1).
(3) Install tensioner (TM 9-2320-279-20).
(4) Install winch on vehicle (TM 9-2320-279-20).
(5) Install cable (TM 9-2320-279-20).
(6) Fill with oil (LO 9-2320-279-12).
(7) Check operation of heavy duty winch (TM 9-2320-279-10).
END OF TASK
16-38.11