2-28. MANUALLY UNLOADING THE BAP TO THE GROUND (continued).
When selecting PTO ENGAGE switch, engine must be at low idle speed.
Selection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in damage to
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
Turn LHS MODE SELECT switch (7) to HOOK ARM ONLY (position 2).
Position HIGH IDLE switch (8) to ON.
Move joystick (9) to UNLOAD and hold while hook arm rises and moves the BAP to the rear. Release
joystick (9) when hook arm completes its full movement rearward.
Position HIGH IDLE switch (8) to OFF.
Turn LHS MODE SELECT switch (7) to MAIN FRAME ONLY (position 3).
Turn HIGH IDLE switch (8) to ON.
Move joystick (9) to UNLOAD and hold until back edge of the BAP touches the ground.