The following manual mode operations using the cab control box are to be
performed only when the normal AUTO SEQUENCE mode electric circuit is
a. Secure winch frame to the BAP. Make sure two winch
frame locking levers (1) are in the up position. If locking
Remove lockpin (2) from each locking lever (1).
Swing locking lever (1) to the up position.
Insert lockpin (2) into locking lever (1).
b. Connect two hydraulic hoses (3) to the stowed location
If the BAP is loaded, inspect load and make sure it is secure.
d. Drive Transporter to unloading area, apply service brake, and place transmission in neutral.