TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
23-10. SHIPPING AND STORAGE CONTAINERS, ENGINE, TRANSMISSION, AND
TRANSFER CASE SERVICE AND REPAIR. (CONT).
b. Disassembly.
NOTE
All three containers are repaired the same. Engine container shown throughout
the task.
(1) Remove seal (1) from lower container (2).
NOTE
All reusable containers are similar except for shapes and quantity of mounting
brackets and hardware. Transmission has 3 brackets, 6 screws, washers,
lockwashers and nuts. Transfer case has 4 brackets, 8 screws, washers,
lockwashers, and nuts.
(2) Remove eight nuts (3), lockwashers (4), washers (5), screws (6), and two mounting brackets (7).
NOTE
Inner frame for transmission and transfer case only have four screws and
lockwashers.
l Mark position of inner frame before removal.
(3) Attach suitable lifting device to inner frame (8) and remove 24 screws (9), lockwashers (10), and
inner frame (8) from lower container (2).
23-68
