TM 9-2320-279-34-3
M978 Tanker Maintenance Procedures Instructions (Cont)
NOTE
When installing front bearing plate
assembly make sure rotor shafts are
seated in holes in rear bearing plate
and turn freely.
(7) Install two pins (13) in housing (10).
(8) Install front bearing plate
assembly (4) on housing (10) with
six screws (14) and
lockwashers (15).
(9) Install two pins (16) in
housing (10).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(10)
(11)
(12)
Apply silicone adhesive-sealant
and install gasket (17) and front
cover (18) on housing (10) with nine screws (19) and washers (20).
Apply pipe thread sealing compound
to plug (20) and install in rear
cover (22).
Apply silicone adhesive-sealant and
install gasket (23) and rear cover (22)
on housing (10) with nine
washers (24) and screws (25).
22-41
