TM 9-2320-279-34-3
Hydraulic System Maintenance Instructions (Cont)
c. Assembly.
NOTE
Lubricate all internal parts before installing.
(1) Install washer (1), spacer (2), spring (3), spool collar (4), washer (5), and screw (6) on valve
spool (7).
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Install spacer (8), packing retainer (9), and preformed packing (10) on valve spool (7).
Install valve spool (7) in valve body (11).
Install preformed packing (12) and packing retainer (13) on valve spool (7).
Install cover (14) with four
screws (15).
Install preformed
packing (16) on plug (17).
Install load check
poppet (18), spring (19), and
plug (17) in valve body (11).
Install two preformed
packings (20 and 21) and
retainer (22) on relief
valve (23). Install relief
valve.
Install bracket (24) with
two screws (25).
d. Follow-on Maintenance. None.
END OF TASK
20-9
