TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
NOTE
Some models have guide tubes. For outriggers
without guide tubes, do step (15). For outriggers with
guide tubes, do steps (16) and (17).
(15)
Install bracket (29) with two washers (30),
lockwashers (31), and nuts (32).
(16) Install bracket (33) with two washers (34),
lockwashers (35), and nuts (36).
(17)
Install right guide tube (37) and left guide
tube (38) using screw (39), two washers (40),
and locknut (41). Tighten nut until there is a
0.03-in. (0.75 mm) gap between washer and
guide tube.
c.
Follow-on Maintenance.
(1)
Outrigger cover installed (TM 9-2320-279-20).
(2)
Outrigger leg cylinder installed (para 17-35).
END OF TASK
Change 3
17-170.4.1/(17-170.4.2 blank)
