(3)
(4)
(5)
(6)
(7)
(8)
M977, M985, and M984E1 Crane
Remove valve (9) from solenoid (5).
Remove backup ring (10), preformed
packing (11), and preformed packing (12)
from valve (9).
Remove elbow (13) and preformed
packing (14) from valve (15).
Remove fitting (16) and preformed
packing (17).
Remove cartridge (18) from valve (15).
Remove preformed packing (19), backup
ring (20), backup ring (21), and preformed
packing (22) from cartridge (18).
j. Cleaning/Inspection.
WARNING
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(1) Clean all metal parts in dry cleaning solvent.
(2) Inspect each part for damage.
(3) Replace damaged parts.
k. Assembly.
(1) Install preformed packing (1), backup ring (2),
backup ring (3), and preformed packing (4) on
cartridge (5).
(2) Install cartridge (5) in valve (6).
(3) Install preformed packing (7) and fitting (8).
(4) Install preformed packing (9) and elbow (10).
TM 9-2320-279-34-3
Maintenance Instructions (Cont)
1 7 - 1 5 0 .3
