(3)
(4)
(5)
(6)
(7)
(8)
(9)
M977, M985,
Attach suitable lifting
device to cylinder (3).
Remove screw (4),
washer (5), spacer (6), and
lockpin (7).
Remove pin (8).
Remove screw (9),
washer (10), spacer (11),
and lockpin (12).
Repeat step (6) for other
side.
Drive pin (13) in far enough
to clear cylinder (3).
Remove cylinder (3).
TM 9-2320-279-34-3
and M984E1 Crane Maintenance Instructions (Cont)
(10) Remove three fittings (14) and
preformed packings (15).
(11) Remove elbow (16), preformed
packing (17), plug (18),
preformed packing (19),
plug (20), and preformed
packing (21).
(12) Remove two grease fittings (22)
from each end of cylinder (3).
b. Cleaning/Inspection.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap
and water.
(1) Clean all metal parts in dry cleaning solvent.
(2) Inspect each part for damage.
(3) Replace damaged parts.
17-77
