(2)
(3)
(4)
(5)
(6)
(7)
TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
Remove screw (3), washer (4),
spacer (5), and lockpin (6).
Repeat step (2) for other side.
Drive pin (7) in far enough to clear
cylinder (2).
Lower end of cylinder (2).
Remove screw (8),
washer (9), spacer (10), and
lockpin (11).
Soldier A removes pin (12)
while Soldier B holds and
removes cylinder (2).
NOTE
Left cylinder does not have tee fitting.
(8) Remove tee fitting (13) and preformed packing (14).
(9) Remove two elbows (15) and preformed packings (16).
(10) Remove two grease fittings (17) from each end of cylinder (2).
17-69
