TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
10-12. DIFFERENTIAL CARRIER, AXLE NO. 4 (AXLE MODELS 480 AND 580) REPAIR
(CONT).
c. Assembly.
WARNING
Adhesives, solvents, and sealing compounds can burn
easily, can give off harmful vapors, and are harmful to
skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If
adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(1) Apply adhesive-sealant and install cover (1) on
differential carrier (2).
(2) Install two screws (3) and lockwashers (4). Tighten
screws to 35 to 45 lb-ft (47 to 61 N·m).
NOTE
Lubricate bearings before installing.
(3) Install bearing cone (5) on gear support case cover (6).
TA356078
(4) Install bearing cone (7) on differential case plain half (8).
10-72
