TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
16-17. HEAVY-DUTY WINCH BRAKE REMOVAL/REPAIR/INSTALLATION.
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
References
M984E1
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-10 Shut off engine.
None
TM 9-2320-279-10 Heavy-duty winch cover
Supplies
raised.
LO 9-2320-279-12 Heavy-duty winch oil
Adhesive-Sealant, silicone, Item 6,
drained.
Appendix C
Compound, sealing, pipe thread, Item 29,
Special Environmental Conditions
Appendix C
None
Solvent, dry cleaning, Item 58, Appendix C
Tags, identification, Item 61, Appendix C
General Safety Instructions
None
Personnel Required
MOS 63W, Wheel vehicle repairer
Level of Maintenance
Direct Support
a. Removal.
NOTE
. Place suitable container
under brake to catch oil.
l Matchmark brake housing,
(2)
(3)
(4)
adapter and ring gear.
(1) Remove plug (1).
NOTE
Tag and mark hydraulic lines
and fittings before removal.
Disconnect two hydraulic
lines (2).
Remove elbow (3),
preformed packing (4),
elbow (5), and preformed
packing (6) from brake (7).
Remove 12 screws (8),
lockwashers (9), and
brake (7).
Change 1
16-63
