TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
d. Assembly.
NOTE
Lubricate preformed packings before installing.
(2) Install packing retainer (l), preformed packing (2),
preformed packing (3), packing retainer (4),
preformed packing (5), and two packing retainers (6)
on valve (7).
(2)
(3)
(4)
Install pin (8), two balls (9),
springs (10), preformed
packings (11), and plugs (12)
in valve body (13).
Install ball (14), setscrew (15),
preformed packing (16), and
plug ( 17).
Install preformed packing (18)
and plug (19).
e. Installation.
NOTE
Lubricate preformed packings before installing.
(1) Install three preformed packings (1) and elbows (2) in valve body (3).
(2) Install valve (4) and tighten to 65 lb-ft (88 N•m).
(3) Install preformed packing (5) and coupling and elbow (6)
on valve body (3) with two flange halves (7), four
lockwashers (8), and screws (9).
16-58.3
