TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
16-11.1. HEAVY-DUTY WINCH REPAIR (M984E1 ) (CONT).
(15)
(16)
(17)
(18)
All three gears are installed the same.
Position snap ring (24), two washers (25), and gear (23).
Install pin (26), lock tab (27), lockwasher (28), and screw (29) in third carrier (30).
Attach dial indicator to third carrier (30).
NOTE
Replace third carrier washers if gear end play is 0.55 in. (1.4 mm) or more.
Move gears (23) down then up and read amount of end play on dial indicator.
16-38.8
