TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
a. Removal.
NOTE
Right and left winch brackets are removed and installed the same way.
(1) Remove seven nuts (1) and screws (’2) from winch bracket (3).
(2) Remove winch bracket (3).
(3) Remove bushing (4).
(4) Remove two nuts (5), washers (6), and screws (7) from both ends of support (8). Move light
bracket (9) out of way.
(5) Remove four nuts (10) and screws (11).
(6) Remove support (8).
(7) Remove grease fitting (12).
(8) Remove bushing (13).
b. Installation.
(1) Install bushing (13) in support (8).
(2) Install support (8) with four screws (11) and nuts (10).
(3) Install light bracket (9) with two screws (7), washers (6), and nuts (5) on both ends of
support (8).
(4) Install grease fitting (12).
(5) Install bushing (4) in winch bracket (3).
(6) Install winch bracket (3) with seven screws (2) and nuts (1).
c. Follow-on Maintenance. Install heavy-duty winch (para 16-10).
END OF TASK
16-23
