TM 9-2320-279-34-2
Cab and Body Maintenance Instructions (Cont)
(5)
(6)
(7)
(8)
(9)
(lo)
(11)
(12)
(13)
(14)
Position hose reel (20) in stand (21).
Install shim (22) on end of dual outlet
hub (23).
Install bearing holder (24) on end of dual
outlet hub (23) and stand (21 ) with two
screws (25) and locknuts (26).
Repeat step (7) for other side.
Install ratchet mechanism (27) on
stand (21) with two screws (28) and
locknuts (29).
Install two brackets (30) on
stand (21) with two
screws (31), washers (32),
and nuts (33).
Install key (34), spring
arbor (35), and
setscrew (36) on dual outlet
hub (23).
Install spring housing (37) on two
brackets (30) with four screws (38) and
nuts (39).
Install rear mount (40) with two
screws (41) and nuts (42).
Install front mount (43) with two
screws (44) and nuts (45).
15-45
