TM 9-2320-279-34-2
Cab and Body Maintenance Instructions (Cont)
15-4. DEFROSTER NOZZLE REMOVAL/INSTALLATION (CONT).
b. Installation
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(1) Apply silicone adhesive-sealant to two defroster nozzles (1).
(2) Install two defroster nozzles (1) with two rivets (2) each.
NOTE
Install plastic cable ties as necessary.
(3) Install two defroster hoses (3).
(4) Repeats steps (1), (2), and (3) for right side.
c. Follow-on Maintenance. Install defroster plenum (para 15-3).
END OF TASK
15-20