TM 9-2320-279-34-2
(1)
(2)
(3)
(4)
Frame Maintenance Instructions (Cont)
Tag and mark 14 screws (1) and eight screws (2) for position. Soldier A removes 14 screws and
eight screws while Soldier B removes 22 nuts (3).
Remove left crane mount support (4).
Soldier A removes 14 screws (5) and four screws (6) while Soldier B removes 18 nuts (7).
Remove right crane mount support (8).
b. Installation.
(1) Soldier A installs right crane mount support (8) with 14 screws (5) and four screws (6) while
Soldier B installs 18 nuts (7).
(2) Soldier A installs left crane mount support (4) with 14 screws (1) and eight screws (2) while
Soldier B installs 22 nuts (3).
c. Follow-on Maintenance.
(1) Install rear fenders (TM 9-2320-279-20).
(2) Install rear cable tensioner (TM 9-2320-279-20).
(3) Install right intermediate fender (TM 9-2320-279-20).
(4) Install left intermediate fender (TM 9-2320-279-20).
(5) Install crane (TM 9-2320-354-24&P).
END OF TASK
13.30. CRANE MOUNTING BRACKETS REMOVAL/INSTALLATION (M985E1).
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
Equipment Condition
M985E1
TM or Para
Condition Description
Test Equipment
TM 9-2320-355-
Crane removed.
None
24&P
Special Tools
TM 9-2320-279-20 Rear fenders removed.
None
Special Environmental Conditions
Supplies
None
None
General Safety Instructions
None
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
Level of Maintenance
References
Direct Support
None
13-89
