TM 9-2320-279-34-2Frame Maintenance Instructions (Cont)b.Installation.(1)(1.1)(2)(3)(4)If removed or not previously installed, install two quickedges (1) on crossmember (1.1).Soldier A and Soldier B install crossmember (1.1) with 23 screws (2) and locknuts (3). Do nottighten.Install spacer (4) and bracket (5) with one screw (2) and locknut (3).Soldier A holds 23 screws (2) while Soldier B tightens 23 locknuts (3).Install four support brackets (6) with 16 screws (7) and nuts (8).Tighten nuts on all vehicles to 170 lb-ft(230 N•m).NOTEInstall hose brackets, clips, and plastic cableties as required.(5)There are two models of vehicles. Model Acontains a torque rod with no spacers.Model B uses spacers for torque rodinstallation. Do step (5) for Model A. Dosteps (6) through (9) for Model B.Install front mounting plate (9) and torquerod (10) with four screws (11), eightwashers (12), and four locknuts (13).Change 213-32.1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
