TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
(5) Remove two nuts (10), four
washers (11), and two
screws (12) from torque
rod (13) and axle mounting
bracket (14).
(6) Move torque rod (13) aside.
NOTE
Screw and washer will come out with inner beam end adapter.
(7) Remove nut (15), two washers (16), screw (17), and two beam end adapters (18) from equalizer
beams (19) on each side of axle (9).
WARNING
Axle is very heavy. Keep out from under heavy parts. Falling parts may cause
serious injury or death.
(8) Soldier A and Soldier B remove axle (9).
10-3
