TM 9-2320-279-34-2
Change 3
12-19
Steering System Maintenance Instructions (Cont)
Section III. STEERING GEAR AND SLAVE
This task covers:
a. Removal
e. Assembly
b. Disassembly
f. Installation
c. Cleaning/Inspection
g. Follow-on Maintenance
d. Repair
INITIAL SETUP
Supplies
Compound, antiseize, Item 17, Appendix C
Compound, sealing, Teflon, pipe thread,
Item 28.2, Appendix C
Grease, automotive and artillery, Item 34,
Appendix C
Oil, lubricating, Item 46, Appendix C
Solvent, dry cleaning, Item 57, Appendix C
Tags, identification, Item 60, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer (3)
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
LO 9-2320-279-12 Hydraulic system drained.
References
None
Special Tools
None
12-5.STEERING GEAR AND PITMAN ARM REMOVAL/REPAIR/INSTALLATION.
Models
All
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Removal.
(1)
Remove screw (1), locknut (2), and end yoke (3).
NOTE
Tag and mark hydraulic hoses before disconnecting.
(2)
Disconnect four hydraulic hoses (4).
(3)
Remove nut (5), lockwasher (6) and loosen intergear link end (8).
