TM 9-2320-279-34-2
Brake System Maintenance Instructions (Cont)
c. Assembly.
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. lb avoid
injury or death, keep away from open tire and
use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1)
Coat threads of pipe plug (1) with pipe
thread sealing compound.
(2)
Install pipe plug (1) in housing (2).
(3)
Install diaphragm (3), retainer (4), and
screw (5) in housing (2).
CAUTION
Lubricate all preformed packings, bores, and mating
surfaces with silicone lubricant before assembly. Failure to
comply may result in damage to equipment.
(4)
Install valve stem guide (6) in lower static piston
body (7).
WARNING
Wear eye protection and use care when installing retaining
rings. Retaining rings are under spring tension and can act
as projectiles when released, causing severe eye injury.
(5)
Install retaining ring (8) in lower static piston
body (7).
(6)
Install two preformed packings (9) and
preformed packing (10) on lower static piston
body (7).
Change 2
11-51
