TM 9-2320-279-34-2
Brake System Maintenance Instructions (Cont)
(15) Install cover (26) with two screws (27), and
lockwashers (28). Tighten screws to 20 to 30 lb-in.
(2 to 3 N•m).
(16) Install diaphragm (29) on cover (26).
(17) Install check valve (30) and spring (31).
WARNING
Adhesives, solvents, and sealing compounds can burn
easily, can give off harmful vapors, and are harmful to
skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If
adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(18) Coat plug (32) with pipe thread sealing compound
and install.
cf. Follow-on Maintenance. None.
END OF TASK
11-7. PARKING BRAKE VALVE REPAIR.
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
Equipment Condition
All
TM or Para
Condition Description
Test Equipment
Parking brake valve on clean
None
work surface.
Special Tools
Special Environmental Conditions
None
None
Supplies
General Safety Instructions
Solvent, dry cleaning, Item 57, Appendix C
None
Oil, lubricating, Item 46, Appendix C
Level of Maintenance
Personnel Required
Direct Support
MOS 63W, Wheel vehicle repairer
References
None
11-15
