TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
b. Installation.
(1)
Coat preformed packing (6) with lubricating oil and install preformed packing on filter
element (3).
(2)
Install screw (1) with washer (2) through filter element (3) and two spacers (5).
(3)
Install filter element (3) in transmission (4).
(4)
Tighten screw (1) to 17 to 20 lb-ft (23 to 27 Nm).
C.
Follow-on Maintenance. Install oil pan (para 7-11).
END OF TASK
Section VI. GEAR UNIT AND MAIN SHAFT
7-13. GEAR UNIT AND MAIN SHAFT ASSEMBLY REMOVAL/REPAIR/INSTALLATION
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
References
None
Special Tools
Sun gear bushing reamer set J28489
Bushing installer J24201
Main shaft lifting bracket J24196
Bushing swaging tool J26997-A
Bushing installer J25458-3
Pilot tool J28489
Equipment Condition
TM or Para
Condition Description
Para 7-19
Second clutch and
center support
housing removed.
Special Environmental Conditions
None
Supplies
Solvent, drycleaning, Item 57, Appendix C
Compound, sealing, lubricating,
Item 25, Appendix C
Oil, lubricating, Item 46, Appendix C
Tag, identification, Item 60, Appendix C
General Safety Instructions
None
Level of Maintenance
General Support
Change 3
7-77
