TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
(47) Deleted.
(48)
Install fitting (86), preformed packing (86.1), two clamp halves (87), four lockwashers (88), and
screws (89).
NOTE
Trucks with guard, perform step (48.1). Trucks without guard, proceed to step (50).
Ensure guard is fully seated under flat washers.
(48.1) Install guard (89.1) under two flat washers (89.2) with two lockwashers (89.3) and screws (89.4).
(49) Deleted:
NOTE
DO steps (50) through (59) for M984E1.
(50)
(51)
(52)
(53)
(54)
(55)
(56)
Connect hose (92) to fitting (93) on
heavy-duty winch manifold valve (94).
Connect two hoses (95) to fittings (96)
on heavy-duty winch manifold
valve (94).
Connect two hoses (97) to fittings (98)
on heavy-duty winch manifold
valve (94).
Connect hose (99) to fitting (100).
Remove valve (101).
Connect hose (102) to fitting (103) on
heavy-duty winch manifold valve (94).
Install valve (101).
Change 3
7-31
