T M 9 - 2 3 2 0 - 2 7 9 - 3 4 -1
Electrical System Maintenance Instructions (Cont)
6 - 1 3 . C A B W I R I N G H A R N E S S R E M O V A L / I N S T A L L A T I O N ( C O N T ) .
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Install three receptacles (7) with 12
screws (8).
Install three clamps (9) with screws (10)
and washers (11).
Connect two connectors (12).
Connect two harness wires (13) to
starter relay (14).
Connect one harness wire (15) to horn
relay (16).
Connect cab wiring harness (1) to circuit
breaker rack (17).
Pull right composite light
wires (18) through hole in
heater compartment (19).
N O T E
Tie right composite light wires
with plastic cable ties.
(11)
(12)
(13)
(14)
6 - 8 0
Route right composite light
wires (18) through clip (20)
and install clip to glove
box (21) with screw (22),
washer (23),
lockwasher (24), and
nut (25).
Connect three right
composite light wires (18) to
wire connectors (26).
Connect three plugs (27) to
right headlight (28),
Install headlight guard (29)
with four screws (30).
