TM 9-2320-279-34-1
Engine Maintenance Instructions (Cont)
3-3. ENGINE REMOVAL/INSTALLATION (CONT).
(21)
(22)
Soldier A looks in access hole (22) while Soldier B turns pulley nut (23) until screw hole is
centered in access hole.
Install, but do not fully tighten, torque converter screw (28).
NOTE
(23)
(24)
(25)
Repeat steps (21) and (22) until all 12 torque converter screws have been installed.
Soldier A looks in access hole (22) while Soldier B turns pulley nut (23) clockwise.
Soldier A tells Soldier B to stop turning pulley nut (23) when torque converter screw (28) is
centered in access hole (22).
Soldier A tightens torque converter screw (28) to 105 to 115 lb-ft (142 to 156 N•m).
NOTE
Repeat steps (23), (24), and (25) until all 12 torque converter screws have been
tightened.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(26)
Apply pipe thread sealing compound and install plug (29) in access hole (22).
3-20 Change 3
