TM 9-2320-279-34-1
Maintenance Procedures (Cont)
CAUTION
To prevent corrosion, parts should be coated with rust preventive within 2 hours
of degreasing.
(5)
Remove parts from degreaser. Check that all oil passages and cavities are clean and clear.
Before coating with rust preventive (Item 53, Appendix C), run thin flexible wire through oil
passages to make sure they are not clogged. Use drycleaning solvent and compressed air to
clean dirty oil passages.
Change 3
2-138.1/(2-138.2 blank)