TM 9-2320-279-20-3
Body Accessory Maintenance Instructions (Cont)
a.
Removal
NOTE
There are two types of fuel nozzle assemblies. Model B does not have a bushing.
Perform steps (1) and (2) for Model A. Perform steps (3) and (4) for Model B.
(1)
Remove fuel nozzle assembly (1) from bushing (2).
(2)
Remove bushing (2), pipe nipple (3), coupling (4), and gasket (5).
(3)
Remove fuel nozzle assembly (1) from swivel (2.1).
(4)
Remove swivel (2.1), pipe nipple (3), coupling (4), and gasket (5).
b. Installation.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Perform steps (1) through (3) for Model A. Perform steps (4) through (6) for Model B.
(1)
Apply pipe thread sealing compound to threads of pipe nipple (3) and bushing (2).
(2)
Install bushing (21, pipe nipple (3), coupling (4), and gasket (5).
(3)
Install fuel nozzle assembly (1) on bushing (2).
(4)
Apply pipe thread sealing compound to threads of pipe nipple (3).
(5)
Install swivel (2.1), pipe nipple (3), coupling (4), and gasket (5).
(6)
Install fuel nozzle assembly (1) on swivel (2.1).
c. Follow-on Maintenance.
(1)
Install nozzle on transfer hose (TM 9-2320-279-10).
(2)
Check operation of nozzle (TM 9-2320-279-10).
END OF TASK
Change 2
18-31
