TM 9-2320-279-20-3
18-20.14
Change 6
Body Accessory Maintenance Instructions (Cont)
18-9.4. WINDSHIELD WIPER/WASHER HARNESS (24V) REMOVAL/INSTALLATION
(CONT).
b. Installation.
NOTE
Install wire and connectors as noted
prior to removal.
(1)
Position windshield wiper/washer
wire harness (1) in vehicle.
NOTE
Install cable ties as required.
(2) Connect wiper motor connector (2)
to windshield wiper/washer
harness connector (3).
(3) Install ground wire (4) on stud (5)
with nut (6).
(4) Install wire (7) on circuit breaker
(8) with nut (9).
(5) Install two center console covers
(10 and 11) on center console (12)
with 11 screws (13).
