TM 9-2320-279-20-3
18-10
Change 6
Body Accessory Maintenance Instructions (Cont)
18-4. WINDSHIELD WASHER RESERVOIR, HOSES, AND NOZZLES
REMOVAL/INSTALLATION (CONT).
CAUTION
Use care when removing nozzles.
Excessive force may damage nozzle.
(12)
Soldier A holds left nozzle (16) in place
while Soldier B removes nut (19) from
left nozzle.
(13)
Remove left nozzle (16) and gasket (20).
Remove hose (21) from left nozzle.
(14)
Soldier A holds right nozzle (18) in place
while soldier B removes nut (22) from
right nozzle.
(15) Remove right nozzle (18) and gasket (23).
Remove hose (24) from right nozzle.
b. Installation.
CAUTION
Use care when installing nozzles.
Excessive force may damage nozzle.
(1)
Soldier A installs left nozzle (1), gasket
(2), and hose (3).
(2) Soldier A holds left nozzle (1) in place
while Soldier B installs nut (4) on left
nozzle.
(3) Soldier A installs right nozzle (5),
gasket (6), and hose (7).
(4)
Soldier A holds right nozzle (5) in place
while Soldier B installs nut (8) on right
nozzle.
(5) Install hose (9) on T-fitting (10) and left
nozzle (1).
(6)
Install hose (11) on T-fitting (10) and
right nozzle (5).
(7) Install fluid hose (12) on T-fitting (10).
(8) Install air hose (13) on pressure relief
valve (14).
(8.1) Install pressure relief valve (14) on air
hose (13A).
NOTE
Vehicles are equipped with either air
controlled wipers or 24V electric wipers.
Perform step (8.2) on vehicles with
air controlled wipers, and step (8.3)
on vehicles with 24V electric wipers.
(8.2) Install air hose (13A) on washer
control valve (14A).
(8.3) Install air hose (13A) on windshield
washer solenoid (14B).
