TM9-2320-279-20-3
Filter-Separator Maintenance Instructions (Cont)
(12)
Remove two nuts (26),
screws (27), and coupling
halves (28). Slide coupling
gasket (29) on pipe (30).
(13)
Remove two nuts (31),
screws (32), and coupling
halves (33). Slide coupling
gasket (34) on pipe (35).
(14)
Soldier A removes three
locknuts (36) while Soldier B
holds and removes screws (37)
from filter-separator (38) and
three brackets (39).
(15)
Soldier A guides
filter-separator (38) from top
access opening of pump
module while Soldier B
operates suitable lifting
device.
NOTE
Mark position of brackets on grating.
(16)
Remove three locknuts (40),
screws (41), brackets (42), and
brackets (39) from
grating (43).
(17) Remove two coupling
gaskets (29 and 34) from
pipes (30 and 35).
Change 3
23-27
