TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-5. FRONT BRAKE CAMSHAFT AND SLACK ADJUSTER REMOVAL/INSTALLATION.
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
Para 12-2
Hub and drum assembly
removed.
Supplies
None
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
Special Environmental Conditions
None
General Safety Instructions
Wheels chocked.
a. Removal.
NOTE
There are two types of brake chamber brackets. Model A has the brake chamber on the
front side of the bracket. Model B has the brake chamber on the rear side of the bracket. On
both models, the camshaft and slack adjuster are removed the same way. Refer to
TM 9-2320-279-24P for proper part identification if camshaft must be replaced.
(1)
Pry brake shoes (1) away from cam (2) and remove cam roller pins (3) and cam rollers (4).
Change 2
11-9
