TM 9-2320-279-20-2
16-192
Change 4
Cab and Body Maintenance Instructions (Cont)
16-47. PUMP MODULE AND REAR DOORS REMOVAL/INSTALLATION (M978) (CONT).
a. Removal.
WARNING
When door support rods are removed, door may slam shut and cause personal injury.
NOTE
·
Remove cushion clip for high mount stop lamp harness as required.
·
Pump module top door has only one push rod.
(1)
Soldier A removes nuts (1) and lockwashers (2) from lower end of both push rods (3) while
Soldier B supports door (4).
(2)
Remove nuts (5) and lockwashers (6) from upper end of both push rods (3).
(3)
Remove eight nuts (7), lockwashers (8), and screws (9). Remove door (4).
NOTE
Model B has a hasp and lock to secure rear doors. Do step (3.1) for Model B.
(3.1) Drill out four rivets (9.1) and remove staple (9.2) from center post.
