TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-36.1. TOOL STOWAGE BOX REMOVAL/INSTALLATION (M984E1) (CONT).
b.
NOTE
Some vehicles have four nuts, lockwashers,
washers, and screws. Others have four
flanged nuts and screws.
(6)
Remove four nuts (10),
lockwashers (10.1), washers (11),
screws (12), and shelf (13) from stowage
box (1).
(5)
Remove three screws (7), nuts (8), and
bracket (9) from stowage box (1).
(7)
Remove four locknuts (14), screws (15),
and latch (16) from door (17).
NOTE
Not all strikers have shims.
(8)
Remove two screws (18),
lockwashers (19), washers (20),
striker (21), and shim (22) from stowage
box (1).
Installation.
(1)
Install latch (1) on door (2) with four
screws (3) and locknuts (4).
NOTE
Some vehicles have four nuts, lockwashers,
washers, and screws. Others have four
flanged nuts and screws.
(2)
Install shelf (5) with four screws (6),
washers (7), lockwashers (7.1), and nuts
NOTE
Not all strikers have shims. Shims are
used for latch adjustment. Shims may
have to be added or removed to obtain
correct latch adjustment.
(3)
Install shim (9) and striker (10) on
stowage box (11) with two screws (12),
lockwashers (13), and washers (14).
(8).
16-158
Change 2
